Description
2-Channel Active DI Box with Extended Dynamic Range and Sum/Split Options
Product Features
- 2-Channel Active DI box with high-headroom design and +48 V phantom power for extended dynamic range
- Sum and split options for flexible signal routing
- Fully transformer-isolated design ensures electrical separation between PA and stage equipment.
- Balanced line inputs on Neutrik Combo* XLR and high impedance 1/4" TRS connectors
- Stereo input on 1/8" TRS for connection of consumer audio equipment
- Independent phantom powering for each channel for maximum reliability
- Global 20 dB input pad and earth lift switches
- Aluminium extrusion casing with protective rubber corners
- Compact and rugged design
DN200
The DN200 has become an established favorite amongst both engineers and musicians alike. With its high headroom, dynamic response and sonic clarity, DN200 faithfully reproduces the character of electric and acoustic instruments and allows far more of the detail of musical performances to be captured. DN200 is intended for professional applications where +48 V phantom power is a standard feature on all mixing consoles, and its innovative design results in a significantly higher clipping point than many other active DI Boxes, providing +10 dBu output into a 2 KΩ load.
DN200 is built to handle the rigours of life on the road, a thick aluminium extrusion protects the electronics, and in turn is protected by tough silicone rubber corners
Balanced Transformer-Isolated Output
Exhaustive listening tests using a wide variety of active and passive bass guitars, electro-acoustic guitars and electronic musical instruments were carried out to select the components for DN200 to achieve the best musical sound. Not only was the choice of the audio transformer particularly important in achieving this goal, but the impedances of the surrounding components were also highly critical in getting the best possible performance out of the audio transformer. The line-driving characteristics of the transformer output were carefully optimized to provide the best frequency and phase responses for short and long cables and widely differing line and termination impedances.
Dual-Impedance Stereo Inputs
A custom instrumentation-grade balanced input circuit was designed for the DN200 using advanced analogue design techniques to create the very high input impedance required by passive guitar and bass pickups, whilst keeping the actual component values low to minimize noise. This innovative approach to circuit design produces a very low noise floor, which combined with the high clipping point creates an unrivalled dynamic range in a +48 V phantom powered DI Box.
DN200 features dual parallel-connected combo XLR’s / ¼" TRS inputs. When connecting to the Combo XLR input, the input impedance is 20 kΩ, ideal for line level equipment and offering even lower noise performance. This input impedance is far too low for guitar and bass pickups and is removed from the circuit when a jack plug is inserted into the Combo ¼" TRS input, resulting in a nominal 1 MΩ input impedance, ideal for passive electric pickups.
DN200 is also equipped with a Stereo input mini jack which is ideal for connecting MP3 players or mobiles phones etc.
Illuminated 20dB Pad and Earth Lift Switches
DN200 features illuminated -20 dB Pad and Earth Lift switches. The Earth Lift switch separates the input and output grounds, useful in eliminating earth loops between equipment on different mains electricity supplies.
Illuminated Sum and Split switches
For added convenience the DN200 has illuminated Sum and Split switches which along with the +48V phantom power indicator LED’s, provide ‘at a glance’ status display even at wide distances and viewing angles. The Sum switch allows a stereo input signals to be combined into a mono signal which appears at both the L and R output XLR’s. The Split switch takes the L input and sends it to both the L and R output XLR’s.
The ¼" TRS Link Thru jacks may be used for a parallel input connection to a guitar or bass amplifier.
Built for the Road
Featuring a tough aluminium extrusion, the DN200 is designed for the rigours of live concert touring. The protective rubber corners also insulate the DN200 chassis to further enhance its electrical isolation. Premium Neutrik XLR connectors are used to ensure reliable audio connections, night after night.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Refund Policy
Exchange & Refund Policy
Thank you for shopping at Fastrak online. If you are not entirely satisfied with your purchase, we're here to help.
Returns
We accept returns. You can return items that are still in a saleable condition or unopened items in the original packaging within 7 days of your purchase with a receipt or proof of purchase. If 7 days or more have passed since your purchase, we cannot offer you a refund or an exchange.
Upon receipt of the returned item, we will fully examine it and notify you via email, within a reasonable period, whether you are entitled to a return.
Please note that online and in-store sales are handled separately. If you purchased from one of our stores, please contact the store directly. Get store details here: Fastrak Store Info.
To follow up on the status of your online purchase return/exchange, please contact us at online@fastrak.co.za.
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you of the status of your refund/exchange after inspecting the item.
If your return/exchange is approved, we will initiate a refund to your credit card (or original method of payment) or make arrangements for the replacement item to be shipped to you. In the event of a refund, you will receive the credit within a certain amount of days, depending on your card issuer's policies.
Fastrak will charge a 5% fee on any credit card reversals done if a refund or partial refund is required.
Warranty on Products
All of our goods also carry a manufacturers’ warranty (12 Months) where applicable, which will run concurrently with any warranty in terms of the law.
Under no circumstances will we accept returned goods that have been damaged due to the customer’s negligence, the goods have been disassembled, permanently installed, physically altered, used or installed contrary to our or the manufacturer’s instructions and/or have been subjected to misuse or abuse.
Any items needing to be returned for repairs or warranties need to be returned at the client’s expense. Returned goods need to be inspected by trained technical staff before a decision is made as to how the return will be handled. Items cannot simply be exchanged before this procedure has been followed and fault has been identified.
No repairs will take place until it has been confirmed whether the product is to be repaired under warranty or at the client’s expense.
The client agrees that Fastrak is not held responsible for time delays that result from reports coming from the agents who hold the warranties. Until the client accepts the quote and gives the go-ahead, no repairs will commence. The client and Fastrak agree that the agent's report is final in this matter and that that report will be considered as the matter being closed. Any costs incurred during this process will be passed onto the client unless the warranty is active.
Any and all repairs done under warranty or at the client’s expense will only be guaranteed for 3 months unless a new and different issue has been found.
There is no warranty on passive speakers, burnt/blown woofers, or tweeters.
Warranty is only valid if there is no evidence of misuse or tempering on the unit.
Refunds (if applicable)
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If your refund is approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.
Late or missing refunds (if applicable)
If you haven’t received a refund yet, first check your bank account again.
Then contact your credit card company, it may take some time before your refund is officially posted. Next, contact your bank. There is often some processing time before a refund is posted.
If you’ve done all of this and you still have not received your refund yet, please contact us at online@fastrak.co.za
Sale items (if applicable)
Only regular-priced items may be refunded, unfortunately, sale items cannot be refunded.
Exchanges (if applicable)
We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at online@fastrak.co.za to log your request for exchange.
You will receive an e-mail or phone call regarding your exchange. The item should then be sent via courier to our warehouse.
Please note that online and in-store sales are handled separately. If you purchased from one of our stores, please contact the store directly. Get store details here: Fastrak Store Info.
Shipping on exchanges
To return your product, you should courier your product to Fastrak Trading 650 Pty Ltd, Unit E, 300 Elgin Road, Pomona, Kempton Park, 1618.
Additional shipping costs will be charged to the customer if the item is not under warranty.
Customers wishing to return items will need to do so on their own accord.
Shipping costs are non-refundable and will be deducted from the original amount paid if your refund/exchange is approved. In even that Fastrak could not fulfil the order and no shipping was initiated, you will receive a full refund of the original amount paid.
Store Returns/Refunds & Exchanges:
Please Contact the Store Directly
Get store details here: Fastrak Store Info.
Online Returns/Refunds & Exchanges:
Contact: 012 803 0333 or e-mail us at online@fastrak.co.za
