Instrument Accessories

Active DI Box with Extended Dynamic Range Product Features   Active DI box with high-headroom design and +48 V phantom power for extended dynamic range Fully transformer-isolated design ensures electrical separation between PA and stage equipment Balanced line input on Neutrik* XLR and high impedance input and link output on 1/4" TRS connectors 20 dB input pad and earth lift switches Aluminium extrusion casing with protective rubber corners Compact and rugged design DN100 The DN100 has become an established favourite amongst both engineers and musicians alike. With its high headroom, dynamic response and sonic clarity, DN100 faithfully reproduces the character of electric and acoustic instruments and allows far more of the detail of musical performances to be captured. DN100 is intended for professional applications where +48 V phantom power is a standard feature on all mixing consoles, and its innovative design results in a significantly higher clipping point than many other active DI Boxes, providing +10 dBu output into a 2 kΩ load. This increased headroom means that much higher-level input signals can be accommodated without the need for an attenuating pad. Combined with a very low noise input circuit topology, DN100 offers a very wide dynamic range, and only requires a single -30 dB pad for use when connecting directly to instrument amplifier outputs. DN100 is built to handle the rigours of life on the road, a thick aluminium extrusion protects the electronics, and in turn is covered by a tough silicone rubber sleeve. Balanced Transformer-Isolated Output Exhaustive listening tests using a wide variety of active and passive bass guitars, electro-acoustic guitars and electronic musical instruments were carried out to select the components for DN100 to achieve the best musical sound. Not only was the choice of the audio transformer particularly important in achieving this goal, but the impedances of the surrounding components were also highly critical in getting the best possible performance out of the audio transformer. The line-driving characteristics of the transformer output were carefully optimised to provide the best frequency and phase responses for short and long cables and widely differing line and termination impedances. Care was taken in the design of the DN100 to avoid audio transformer core saturation and a fixed high pass filter has been included in the signal path to roll off frequencies below those that are musically important. The lowest note on a 5- or 6-string bass guitar is B0 with a frequency of 30.87 Hz, and the lowest note on an 88-key piano keyboard is A0 with a frequency of 27.50 Hz. DN100 still maintains a frequency response of ±0.5 dB at these lowest musical notes. As well as the transformer in the signal path, DN100 also has a transformer to isolate the power rails to the input circuit from the phantom power supply sourced from the output XLR connector. When used in conjunction with the Earth Lift switch, this full galvanic isolation of input and output interfaces ensures that any risk of earth loops is avoided when taking a direct feed from stage backline equipment. Dual-Impedance Inputs A custom instrumentation-grade input circuit was designed for the DN100 using advanced analogue design techniques to create the very high input impedance required by passive guitar and bass pickups, whilst keeping the actual component values low to minimise noise. This innovative approach to circuit design produces a very low noise floor, which combined with the high clipping point creates an unrivalled dynamic range in a +48 V phantom powered DI Box. DN100 features one parallel-connected XLR and two ¼" TRS inputs, one which may also be used a link output for connection to a guitar or bass amplifier. When connecting to the XLR input only, the input impedance is 20 kΩ, ideal for line level equipment and offering even lower noise performance. This input impedance is far too low for guitar and bass pickups and is removed from the circuit when a jack plug is inserted into a ¼" TRS input, resulting in a nominal 1 MΩ input impedance, ideal for passive electric pickups. Illuminated 30dB Pad and Earth Lift Switches DN100 features illuminated Pad and Earth Lift switches, which along with the +48V phantom power indicator LED, provide ‘at a glance’ status display, even at wide distances and viewing angles. The Earth Lift switch separates the input and output grounds, useful in eliminating earth loops between equipment on different mains electricity supplies. Built for the Road Featuring a tough aluminium extrusion, the DN100 is designed for the rigours of live concert touring. The protective rubber corners also insulate the DN100 chassis to further enhance its electrical isolation. Premium Neutrik XLR connectors are used to ensure reliable audio connections, night after night.

Read more less

Passive Stereo DI Box with Midas Transformer and Extended Dynamic Range Product Features Passive stereo DI Box for general purpose applications Custom-built Midas transformer for highest signal integrity High headroom design offers superior sound quality Passive design does not require any power supply Stereo inputs on 1/4" TS connectors Through connectors on 1/4" TS connectors Switchable input attenuation for guitar, line and speaker levels High quality Neutrik* XLR connectors Earth Lift switch eliminates ground loop problems Fully transformer-isolated design ensures electrical separation Ultra-low noise and ultra-linear system for highest signal integrity Aluminium extrusion casing with protective rubber corners Compact and rugged design Designed and engineered in the U.K. PRO DI 2 DI 20P Building on KLARK TEKNIK’s storied legacy of highest-quality direct injection devices, the DI 20P PRO DI 2 offers the same high headroom, dynamic response and sonic clarity you have come to expect. DI 20P is ideal for interfacing stereo keyboards, samplers and other electronic musical instruments to mixing consoles, and faithfully reproduces the character of electric and acoustic instruments, allowing far more of the detail of musical performances to be captured. A passive device, the DI 20P does not require any form of external power to complete its mission. Equipped with a custom-built MIDAS transformer and switchable input Pad, DI 20P easily accommodates instruments, line, and even loudspeaker level signals – making it the perfect choice for professional audio and multimedia applications. MIDAS – The Legend in Sound Quality Ever since its formation in the 1970s, MIDAS has had a long history of innovation and leadership in the world of audio mixing consoles. Employed by the most famous touring acts and installations world-wide, legendary MIDAS consoles such as the XL4 and Heritage H3000 quickly became industry standards. MIDAS has earned their impeccable reputation due to their no-compromise approach for audio and build quality and in particular for their Award-winning products which are considered by industry experts as the industry’s best sounding designs. Building on this legacy, the XL8 and PRO Series of Live Mixing Systems continue this great heritage of Award-winning audio quality. KLARK TEKNIK is proud to incorporate MIDAS designed transformers for the ultimate in high-quality audio reproduction in both live and studio environments. Find out more about MIDAS’ amazing legacy by visiting their extensive website. Compact & Rugged Construction The ultra-compact DI 20P is built to handle the rigours of life on the road via a thick and rugged aluminium extrusion that protects the electronics. The enclosure’s roadworthiness is further enhanced through the implementation of sturdy rubber corner bumpers. High Headroom Design A custom instrumentation-grade input circuit was designed for the DI 20P using advanced analogue design techniques to create the ideal input impedance match. This innovative approach provides an ultra-low noise, low harmonic and phase distortion input stage with a ruler-flat frequency response that ranges from 20 Hz to 30 kHz (±1 dB). Connectivity & More DI 20P PRO DI 2 features genuine high quality Neutrik* XLR and high impedance 1/4" TS connectors to maintain the highest signal integrity. The Input connectors accept unbalanced signals over 1/4" TS cables, with the Thru jacks passing unbalanced 1/4" TS signals to local amps/monitors. The Output XLR jacks send balanced versions of the input signals to your mixing board or other processing device. Input Pad, Earth Lift Switch & More A -15 dB input Pad enables the DI 20P to easily accommodate a wide range of input signals including guitar, line and speaker levels (up to 30 dBu). The onboard Earth Lift switch separates the input and output grounds, eliminating earth loops between equipment on different mains electricity supplies. DI 20P’s fully transformer-isolated design further ensures pristine performance – even in large-scale production environments. Versatility The DI 20P PRO DI 2 provides maximum versatility, frequency response from 20 Hz to 30 kHz (�1 dB), MIDAS custom-design transformers for the ultimate signal integrity, and much more � all in a road-ready enclosure that stands ready for your input.

Read more less

DI600P   High-Performance Passive DI-Box   Product Features  Professional and multi-purpose direct injection box for stage and studio applications
 Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers
 Ultra-flat frequency response due to renowned Behringer OT-2 transformer
 Allows direct connection to speaker outputs with up to 3,000 Watts
 Ground Lift switch eliminates typical ground loop problems
 Filter switch reduces annoying hiss and buzz
 Thru/Out jack lets you send the unbalanced signal to an onstage amplifier while the balanced signal is routed to the mixer
 ¼“ TRS and gold-plated XLR connectors
 Ultra-rugged, road-suitable metal case
 Designed and engineered in Germany
   ULTRA-DI DI600P The ULTRA-DI DI600P is a passive DI (Direct Injection) box for connecting a guitar, bass or keyboard directly to your mixer. With the DI600P as your go-between, impedance-matching problems become a thing of the past, and long cable runs will not sacrifice all of your precious tone.   Directly to the Point With its parallel ¼ " In and Out jacks, the DI600P allows you to plug in your instrument and send the same signal to your onstage amplifier, while the XLR Output sends a balanced signal to your mixer. You can even plug your guitar, bass or keyboard amp’s speaker output into the DI600P, which can handle ratings of up to 3,000 Watts and still deliver a perfect signal. The superior ground-lift switch eliminates hum associated with ground loops, the Filter switch reduces hiss and buzz – and our high-performance OT-2 transformer provides the ultimate in signal integrity.   Special Feature Just flip the Inst/Amp switch and the DI600P can easily accommodate either the low-level signal of a high-impedance mic, bass, guitar or keyboard (Inst mode), or the speaker output of an amplifier (Amp mode). Even if your amp cranks out as much as 3,000 Watts, you get a perfect signal every time!  

Read more less

FLOW CLAMP Microphone Stand Mounting Clamp for FLOW Mixers Product Features Mic-stand mounting clamp for FLOW Digital Mixer series Attaches to standard mic stands Quick and easy mounting design Sturdy construction for long life   Simple and Solid The FLOW CLAMP is based on the original TC Helicon PERFORM Series side cap design, using a special material that combines extreme longevity and a dependable, firm connection with the mic stand. It consists of a metal bracket that is screwed to the mixer and the proprietary plastic part that clips on to the mic-stand without any screws. You can choose to mount the clamp to the bracket in 3 angles (0°, 15°, 30°) depending on your preferred mixer orientation.   Control on your Fingertips The FLOW CLAMP is designed to bring your FLOW mixer within reach during your performance. On stage for a small club gig or in a recording setup, the best place will often be right at your microphone stand. It avoids unnecessary cable clutter and keeps the control surface of your FLOW mixer permanently accessible. The clamp is designed for standard 5/8” microphone stands diameter (not exceeding 16.5 mm).   Future Proof Design Tested for a maximum torque of 4 Nm, the construction provides extremely high durability, simplicity and light weight, making it ideal as a multipurpose, one-hand operated microphone stand mount.

Read more less

FTS Sheet Music Stand [DMS-02] Description FTS-DMS02 Sheet Music Stand: Durable, adjustable, and portable steel stand, ideal for musicians in live performances or practice. The FTS-DMS02 Sheet Music Stand is a durable and adjustable stand designed for musicians. Made from high-quality steel, it features a tubular stand with folding tripod legs for stability and portability. Perfect for use in studios, classrooms, or live performances, this stand ensures reliable support for your sheet music. Features: Height adjustable Folding tripod legs Sturdy and lightweight Benefits: Portable and easy to set up Perfect for musicians on the go What's in the Box 1 x DMS-02 Sheet Music Stand

Read more less

FTS Microphone Stand [DMS-05] FTS-DMS-05 Fts Microphone...

Read more less

FTS-JT-TX9-20 YL Double Row Tambourine Yellow Description The FTS JT-TX9-20 Double Row Tambourine in bright yellow is a versatile percussion instrument designed to bring lively rhythms to any musical performance. Featuring a double row of jingles, this tambourine produces a rich, resonant sound that enhances the beat, making it ideal for a variety of music genres, including pop, rock, gospel, and Latin. Its durable construction ensures longevity, while the ergonomic design offers a comfortable grip for extended playing sessions. Perfect for both beginners and experienced musicians, the FTS Double Row Tambourine is lightweight and easy to use, whether you’re in the studio, on stage, or at a jam session. The eye-catching yellow color adds a fun visual element to your performance. Bring energy and rhythm to your music with the FTS JT-TX9-20 Double Row Tambourine.Features- Halfmoon shape- Double Row Tambourine- Yellow colour  Specifications: - Lightweight, strong build - Ergonomic handle What's in the Box - 1 x Double Row Tambourine 

Read more less

P Products Bros Guitar Strap [S008-H P] DescriptionElevate your musical experience with the H&P Bros Classic Guitar Strap. Designed for durability and styled with a classic look, it's the perfect choice for guitarists who value both tradition and comfort. Experience the perfect blend of tradition and comfort with the H&P Bros Classic Guitar Strap. Crafted for durability and styled for the classic musician, this strap features high-quality materials and a timeless design, ideal for any guitar player seeking reliability and elegance. Specification:- Width: 50mm- Length: 1m - 1.7mWhat is in the box:1x S008-H Guitar strap  

Read more less

Please be informed that this item comes with an international adaptor, you will need to get SA converter for it. Behringer DI20 Active Stereo DI-Box   ULTRA-DI DI20 The ULTRA-DI DI20 is a one-of-a-kind DI (Direct Injection) box that can convert up to two separate, unbalanced ¼ " TRS lines into two balanced XLR outputs – or function as a signal splitter. Electric guitarists, keyboardists and bassists will love the flexibility the incredible DI20 provides both in the studio and on the stage Professional Active 2-Channel DI-Box/Splitter •                                Professional and multi-purpose direct injection box for stage and studio applications
 •                                Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers
 •                                Converts 2 independent unbalanced 1/4'' TRS line inputs into 2 balanced XLR outputs
 •                                Additional Split mode (channel 1 assigns signal to both XLR outputs)
 •                                Ultra-flat frequency response due to servo-balanced operation
 •                                Internal battery automatically shuts off when phantom power is applied
 •                                Allows direct connection to speaker outputs with up to 3,000 Watts
 •                                Ground Lift switch eliminates typical ground loop problems
 •                                Input 2 usable as channel 1 Link output (additional to XLR output)
 •                                ¼" TRS and gold-plated XLR connectors
 •                                Ultra-rugged, road-suitable metal case
 •                                Designed and engineered in Germany
   .   Mono, Stereo or Double the Amps By flipping a switch, you can use the DI20 as a launching pad for two separate mono signals, a stereo signal – or a split-signal feeding two separate amps. The DI20 also features a superb ground-lift switch, and the 3-position input attenuator can accommodate input levels of up to +48 dBu.   This handy built-in attenuator also allows you to connect directly to your amplifier’s speaker outputs, even amps rated as high as 3,000 Watts.   You can power the DI20 with either a 9 V battery or your mixer’s phantom power supply (+18 to +48 V DC). The whole package is wrapped in an ultra compact, road-suitable and rugged metal housing.   Be Direct If you’re a working musician who demands uncompromising functionality and durability, the ULTRADI DI20 will astound you – and so will its ultra-affordable price tag! See what the DI20 can do for your sound at your nearest BEHRINGER dealer – or get yours online today.    

Read more less

A502 Ghs 2.0 Alto Sax Reeds Description Featuring a thinner vamp cut designed for ease of play, a traditional blank for a clear sound and unfiled for powerful tone, GHS A502 Alto Sax Reeds are ideal for students, revered by educators worldwide and a favorite among jazz musicians.

Read more less

On Stage XCG-4 Classic Guitar Stand Description Keep a guitar at the ready, safe, and blemish free with the XCG-4 Classic Guitar Stand. The height-adjustable upper yoke and swiveling lower yoke fit any traditionally shaped guitar including acoustic, electric, and bass.  Padding on the yokes protects the guitar's finish and a security strap on the upper yoke prevents the guitar from being bumped off the stand. A wide tripod base provides stability and balance for dependable guitar support. For efficient storage and transportation, the base folds down and the lower yoke detaches.  

Read more less

On Stage SM7312W Conductor Sheet Music Stand with Wide Rosewood Backplate SM7312W Music Stand with Wide Rosewood Bookplate holds pieces ranging from single sheets to heavy music score books while displaying elegant optics for the stage. Its adjustable height and tilt angle enable ergonomic viewing from a sitting or standing position. The tripod base and nonslip feet deliver exceptional balance and stability. The legs fold flat for convenient storage and travel. Bookplate displays multiple sheets at once and supports the weight of music books. Tripod base folds down for efficient storage and transportation Bookplate angle adjusts for clear, easy viewing and locks in place with a tightening knob. Height adjusts to a comfortable level for use while sitting or standing.

Read more less