Audio Interface/Soundcards

Please be informed that this item comes with an international adaptor, you will need to get SA converter for it. Midas DN4888 8-Channel Digital Stage BoxBus-Powered Stage CONNECT Interface with 8x8 Analog In/Out and Dual Ultranet Outputs   DN4888 The DN4888 is the perfect solution for connecting additional equipment to your monitor or FOH console. It provides 8 additional analogues in and outputs to enable for 8 analogue inserts or the connection to wireless devices, like 8 wireless microphones and 8 wireless in-ear systems.  The Stage Connect interface can be connected to other Stage Connect devices using a single XLR cable for multi-channel audio transmission. There are various I/O options available providing easily scalable connectivity in your side rack. The devices of the DN48XX Series can be daisy-chained and will negotiate the channels for their respective connectivity automatically.    Stage Connect – The Future of XLR What if any standard XLR or DMX cable could be used to transmit more than one channel of audio? What if that cable could transmit signals not only one way, but bi-directionally? What if that cable would allow the passage of control data or even MIDI at the same time? What if a connected Stage Connect device could receive up to 18 W of power through that same cable? Well, these capabilities are exactly what Stage Connect delivers – a new interface standard to be released by Music Tribe after two years of development. The Midas DN48XX Series is one of the first available I/O-Interfaces based on the Stage Connect-Standard. This new standard comes with outstanding technical specs: 32 channels of uncompressed PCM audio in various I/O configurations, 24-bit at 48 kHz, below 0.05 ms of latency. For optimum performance and long cable runs 110 Ohm DMX cable is required.   Ecosystem and Beyond The DN48XX Series is the first generation of I/O Interfaces for the new Stage Connect ecosystem. Stage Connect was introduced with the Behringer WING mixing console. Even though the DN48XX Series was designed with the WING console in mind the devices can be used with all Stage Connect devices like HUB4. The Stage Connect Ecosystem opens a wide field of audio devices. May it be several I/O devices spread over the Stage or equipment in the side rack - the use cases for the DN48XX Series Stage Connect Interfaces are virtually endless.    Cascade Interfaces to Meet Your Requirements No matter if you want to use Stage Connect for connecting wireless systems, external effects or playback systems, the devices of the DN48XX series can easily be daisy-chained to meet the requirements of your respective I/O configurations. With a total bandwidth of 32 channels, all combinations ranging from 32 inputs over 16 in and outputs in parallel to 32 outputs can be achieved using different combinations of DN48XX interfaces connected using a simple XLR cable.    Power via DC or Stage Connect The DN48XX Series devices can be powered via DC or via Stage Connect. By design, every SC Master provides 18W of power that can be used by devices in the chain. Depending on the respective power consumption multiple devices in the chain can be phantom powered by a single Master device. It should be noted that an SC device in the chain that is supplied with DC power can supply other devices connected to its Master Port as well. To check your respective setup for power consumption, use the Stage Connect Calculator (SSC Tool). This tool checks a virtually configured chain for the DMX cable lengths, power supply, audio routing and other parameters.    Automatic Bus Configuration There are two ways to configure an SC Chain. Either you can manually configure the chain using devices like WING or let the Automatic Bus Configuration do its work. This process adapts the input and output configuration of the SC Bus depending on the connected devices. Simply connect devices and the Master device of the chain will automatically change the routing. To check and plan setups, the SSC Tool software is available, providing information about the routing and DMX cable length, power management and other parameters.    Analogue I/O for External Effects The DN4888 features 8 balanced line-level in and outputs that can feed external FX processors. All you need to do is mount the DN4888 to your effect rack and connect it to your Console using a single XLR cable. This way you can save local outputs, reduce setup time and increase reliability considerably. Alternatively, these connections can be used for wireless transmitters and receivers or any other application requiring additional analog in and outputs.    ULTRANET – Seamless Integration The well-established ultranet technology transmits up to 16 independent channels of 24-bit digital audio via a single CAT5 cable between compatible digital devices. The DN48XX Series devices serve Ultranet connectivity for translation between Stage Connect and Ultranet. This way more than 1 million Ultranet products in the market like the P16 monitoring system, AIR mixers and Turbosound speakers can be integrated in the Stage Connect ecosystem.    Stage Connect Calculator The Stage Connect Calculator is a tool that can be used for checking and planning setups. You can create a virtual SC chain to study the upstream and downstream routing. The calculator also indicates parameters maximum DMX cable lengths, power budget and the overall stability of your connection.   You can virtually change the configuration of individual devices, change their order and intuitively add or remove devices from the chain. This allows you to explore the possibilities of routing signals through the new ecosystem. 

Read more less

UFO202   Audiophile USB/Audio Interface with Built-in Phono Preamp for Digitalizing Your Tapes and Vinyl Records   Product Features High-quality USB/audio interface connects your turntable, cassette player etc. with your computer for recording and playback
 Transfer and restore your valuable vinyl records and tapes to your computer via a simple USB connection
 Audacity* vinyl restoration, noise-reduction, editing and recording software plus comprehensive podcasting software available for free at behringer.com
 Phono input switchable to line input source
 Stereo output allows easy connection and playback of computer audio files over your home sound system
 High-resolution 48 kHz converters for high-end audio quality
 Stereo Headphone output with dedicated Level control lets you monitor your input source
 Works with your PC or Mac* computer?no setup or drivers required
 Powered via USB?no external power supply needed
 Designed and engineered in Germany
   Don’t Know What These Are? Then, Move Along, Nothing to See Here... But, if you do, and you love them as much as we do, you’re also going to love the amazing UFO202 – the simple and affordable way to get your vinyl records and tapes into the digital realm. The U-PHONO UFO202 is supremely-easy to use and comes with a bevy of professional software that, not only converts your favorite recordings into a computer-based music library – but removes the scratches and pops so common to vinyl media. State-of-the-art, switchable Line/Phono preamps and digital converters ensure the utmost in sound quality, making the U-PHONO UFO202 Audio Interface a must-have for every audiophile.   Versatility of a Powerful Miniature Interface The UFO202 boasts an impressive set of features for its micro size. Use the UFO202’s RCA Inputs and Outputs to connect your computer and your mixing console, tape deck, keyboard, sound modules and active monitors, to just name a few of the myriad options. Additionally, when you connect the UFO202’s outputs to your mixer’s input channels, you gain access to EQ, Aux Sends and much more – allowing you to build extremely-versatile monitor mixes for your recording sessions.   48 kHz Precision You take your tracks seriously, and the UFO202 respects them too, providing 48 kHz resolution, for the amazingly-detailed and pristine recording quality your music deserves.   Getting Connected The UFO202 features a stereo input for connecting turntables or any line-level device (such as a mixer or tape deck), plus a stereo analog output for connecting active speakers or studio monitors. You can also connect electronic instruments with RCA connections, such as keyboards, sound modules, and drum machines directly to your computer for recording. The Volume control allows you to set the level of the stereo headphones.   Free Would Be Nice! Because you’ll want to take full advantage of the UM2’s recording and podcasting potential, we’ve included all the software you’ll need for audio recording, editing and even podcasting – all free of charge and downloadable from behringer.com. You’ll be ready to go live on your PC or Mac right out of the box! We’ve also provided a free download of more than 150 virtual instruments and FX plug-ins – turning your computer into a powerful home-based or mobile recording studio from input to output.  

Read more less

UCA222 Ultra-Low Latency 2 In/2 Out USB Audio Interface with Digital Output Product Features   Ultra-flexible audio interface connects your instruments, mixer, etc. with your computer for recording and playback Massive software bundle including Audacity audio editor, comprehensive podcasting software and over 150 virtual instruments and effect plug-ins downloadable at www.behringer.com Works with your PC or Mac* computer?no setup or drivers required High-resolution 48 kHz converters for high-end audio quality Stereo Headphone output with dedicated Level control lets you monitor both input and output Additional S/PDIF optical output for direct digital conversion Powered via USB?no external power supply needed Designed and engineered in Germany   U-CONTROL UCA222 The U-CONTROL UCA222 allows you to connect instruments and other audio devices to your computer, effectively merging the analog and digital worlds. It accomplishes this by providing two analog mono Inputs and Outputs (for monitoring), USB connectivity and an additional S/PDIF optical output. The stereo headphone output features a dedicated level control and lets you listen to both the input and output. We even give you all the software you’ll need to get started!   Imagine the Possibilities… When used as a professional interface between a mixing console and your computer, myriad options become available. Some of these might include connecting the UCA222 RCA Outputs to the Tape Input jacks of your mixer or to your powered monitors. Connecting to the mixer input channels allows you to use your mixer’s Aux Send feature to build an extremely-versatile monitor mix for recording sessions.   Tons of Free Software To truly get the most out of your UCA222, you will need recording and editing software. So, we made it easy, providing a single place for you to download lots of free software including: Audacity is an easy-to-use audio editor and recorder for Windows, Mac OS X and Linux operating systems. With Audacity you can: - Record live audio -Convert tapes and records into digital recordings or CDs - Edit Ogg Vorbis, MP3, WAV or AIFF sound files - Cut, copy, splice or mix sounds together - Change the speed or pitch of a recording - And much more…  

Read more less

Behringer UMC22 Audio Interface U-PHORIA UMC22When it’s time to make recording history, you need the best audio interface you can get – and you need one you can count on. That’s why we’re kicking it up a notch with the amazing UMC22, an ultra-compact 2 x 2, 48 kHz USB audio interface with a professional-grade MIDAS-designed Mic Preamp, combination XLR/ TRS input for your vocal and direct instrument input (no DI required) and an additional ¼ " Instrument Input. The rich feature-set, which also boasts a powerful Phones Output for the Direct Monitoring of your session, plus 2 Outputs and USB-supplied power – makes the UMC22 the best, and most-portable recording interface in its class! 2x2 USB audio interface for recording microphones and instruments Audiophile 48 kHz resolution for professional audio quality Compatible with popular recording software including Avid Pro Tools*, Ableton Live*, Steinberg Cubase*, etc. Streams 2 inputs / 2 outputs with ultra-low latency to your computer, supporting Mac OS X* and Windows XP* or higher State-of-the-art, Midas designed Mic Preamplifier with +48 V phantom power Powerful Phones output with Level control and Direct Monitor select Status, Signal and Clip indications for a perfect overview USB port for connection and power Free audio recording, editing, and podcasting software plus 150 instruments/effect plug-ins downloadable at behringer.com "Built-like-a-tank", impact-resistant metal chassis IMPORTANT INFORMATION This soundcard is compatible with both Microsoft Windows and Apple OSX operating systems. For Microsoft Windows, please download the required driver from https://www.fastrak.co.za/products/asio4all and follow the installation instructions. For Apple OSX no additional driver is required and the soundcard is plug and play. Once you have completed installing the ASIO4ALL driver, simply connect the soundcard to your computer using the provided USB Cable. This soundcard is compatible with all DAW software that recognises ASIO4ALL and Core Audio Drivers 48 kHz PrecisionYou take your tracks seriously, and the UMC22 respects them too, providing 48 kHz resolution, for the amazingly-detailed and pristine recording quality your music deserves.Studio in a Little Black BoxWhen those creative juices start flowing, you need a fast and easy way to get those musical ideas into your Mac or Windows computer – that’s where the UMC22 comes in. Just plug in a microphone, instrument, or line-level sources to the combination XLR/TRS input and additional ¼ " input for the ultimate in-studio flexibility. The easy-to-use UMC22 is ready whenever you are, ensuring an ultra-clean pathway to your computer’s hard drive for stunningly-professional results – the perfect solution for the solo musician wanting to capture that next big hit!Seamless Integration with Popular DAWsThe ultra-compact2 UMC2 is totally compatible with virtually all popular recording software including Avid Pro Tools*, Ableton Live*, Steinberg Cubase*, etc., so you can record tracks directly into your favourite computer-based DAW – and mix and master to your heart’s content.MIDAS - The Legend in Sound QualityEver since its formation in the 1970s, MIDAS has had a long history of innovation and leadership in the world of audio mixing consoles. Employed by the most famous touring acts and installations world-wide, legendary MIDAS consoles such as the XL4 and Heritage H3000 quickly became industry standards.MIDAS has earned its impeccable reputation due to its no-compromise approach for audio and build quality and in particular for their Award-winning Mic Preamps which are considered by industry experts as the industry’s best sounding designs. Building on this legacy, the XL8 and PRO Series of Live Mixing Systems continue this great heritage of Award-winning audio quality.BEHRINGER is proud to incorporate a MIDAS-designed mic preamp for the ultimate in high-quality audio reproduction in both live and studio environments. Find out more about MIDAS’ amazing legacy by visiting their extensive website.Convenient MonitoringThe UMC22 mix control allows direct monitor selection, which means musicians can experience their performance clearly – resulting in better performance and recording. With its powerful Phones Output, Direct Monitor Level control, Status and Signal Clip LEDs, plus USB-supplied power – the UMC22 is ready to go wherever you go.Getting ConnectedOn the UMC22’s front panel you’ll find a combination jack that accepts balanced XLR, ¼ " TRS and unbalanced ¼ " TR connections, and an additional ¼ " TRS. The rear panel is home to the +48 V phantom power switch, a USB 2.0 port for simple and easy connection to your computer and power, plus RCA playback options for direct connection to studio monitors. It just doesn’t get any easier than this!Recording the Next Big HitThe amazing UMC22 ultra-compact 2 x 2, 48 kHz USB audio interface allows you to record the perfect vocal or instrument tracks directly to your computer, thanks to the MIDAS-designed Mic Preamp with +48 Volt phantom power for condenser microphones – and studio-grade 48 kHz converter for superb sound quality. Whether you’re a singer-songwriter, producer on the go, or just need a rock-solid interface for running backing tracks at the gig, the ultra-dependable U-PHORIA UMC22 will help you shine in the digital domain.

Read more less

Product Features Ultra-flexible audio interface connects your instruments, mixer, etc. with your computer for recording and playback High-resolution 48 kHz converters for high-end audio quality Works with your PC or Mac* computer - no setup or drivers required. Stereo Headphone output with dedicated Level control lets you monitor both input and output Additional S/PDIF optical output for direct digital conversion Powered via USB - no external power supply needed   U-CONTROL UCA202 The BEHRINGER UCA202 allows you to connect instruments and other audio devices to your computer, effectively merging the analog and digital worlds. It accomplishes this by providing two analog mono Inputs and Outputs (for monitoring), USB connectivity and an additional S/PDIF optical output. The stereo headphone output features a dedicated level control and lets you listen to both the input and output.    Imagine the Possibilities… When used as a professional interface between a mixing console and your computer, myriad options become available. Some of these might include connecting the UCA202 RCA Outputs to the Tape Input jacks of your mixer or to your powered monitors. Connecting to the mixer input channels allows you to use your mixer’s Aux Send feature to build an extremely versatile monitor mix for recording sessions.   Value For a mere fraction of the cost of an USB audio interface from other brands, you can have state-of-the-art digital conversion and hassle-free connectivity between your PC or Mac Computer and any piece of audio equipment. Bridging the gap between your music and the rest of the world—the BEHRINGER U-CONTROL UCA202. Check one out at your local dealer today!  

Read more less

FTS-STUDIO22 Professional Audio Interface (FTS-22) The FTS - Studio22 is a 2 input 2 output sound card with the following hardware features: Input 1 [Microphone/Line1]-This allows for connection of both XLR, ¼” TR, and TRS plugs. Hi-Z switch-This button activates the instrument ampli­cation feature in Input 2. Input 2 [Microphone/Line2]-This allows for connection of both XLR, ¼” TR, and TRS plugs. Input 1 Peak Light- This light will light Red up if the signal is too loud, reduce the Gain 1 knob to avoid distorted recordings. Input 1 Signal Light- This will light up Green if there is a signal coming into Input 1. Gain 1 knob- This Controls the amount of Gain coming into Input 1. Input 2 Signal Light- This will light up Green if there is a signal coming into Input 2. Input 2 Peak Indicator- This light will light Red up if the signal is too loud, reduce the Gain 2 knob to avoid distorted recordings. Gain 1- This Controls the amount of Gain coming into Input 1. Headphone output- allows for connection of headphones using 3.5MM TRS Jack. Phones-This controls the volume of the connected headphones. +48V Light- This will light up Green if phantom power is active. Power Light-Light will light up Red when the sound card has power. Output Control- Control the amount of volume on the main output. USB 2.0 Port- Used to connect the Engineer 2i2o to Computers or Mobile devices (additional hardware and apps required.). Power source- This switch allows for the sound card to receive power from the USB 2.0 port or from the Micro USB port. 5V DC port- Used to power the sound card when used with a mobile device. Plug a Micro USB cable into the Micro USB port, then into a power source. Connect the USB 2.0 into a USB input device on a mobile device. +48V- When switched on Phantom power will be active on Input 1 & 2. Stereo/Mono switch-When pushed in, all inputs will playback mono, when pushed out all inputs will input stereo. Monitor switch- When pushed in out, all outputs will playback live input, when pushed out, all outputs will playback software audio. Gain Control- When pushed out, input gain is controlled by Gain knobs, when pushed in, the gain is determined by software. Main Output L/R- Allows for output connection using ¼” TRS plugs.  The FTS-Studio 22 soundcard is compatible with both Microsoft Windows and Apple OSX operating systems. For Microsoft Windows, please download the required driver from https://www.fastrak.co.za/products/asio4all and follow the installation instructions. For Apple OSX no additional driver is required. Once you have completed installing the ASIO4ALL driver, simply connect the soundcard to your computer using the provided USB Cable. The FTS - Studio22 is compatible with all DAW software that recognizes ASIO4ALL and Core Audio Drivers.

Read more less

Audiophile 2x2 USB Audio Interface with XENYX Mic Preamplifier U-PHORIA UM2 When it’s time to make recording history, you need the best audio interface you can get – and you need one you can count on.   That’s why Behringer is kicking it up a notch with the amazing UM2, an ultra-compact 2 x 2, 48 kHz USB interface with a studio-grade XENYX Mic Preamp, combination XLR/TRS input for your vocal and direct instrument input (no DI required), and an additional ¼ " Instrument Input.   The rich feature-set, which also boasts a powerful Phones Output for the Direct Monitoring of your session, plus 2 Outputs and USB-supplied power – makes the UM2 the best, and most-portable recording interface in its class! 2x2 USB audio interface for recording microphones and instruments Audiophile 48 kHz resolution for professional audio quality Compatible with popular recording software including Avid Pro Tools*, Ableton Live*, Steinberg Cubase*, etc. Streams 2 inputs / 2 outputs with ultra-low latency to your computer, supporting Mac OS X* and Windows XP* or higher State-of-the-art, +48 V-powered XENYX Mic Preamp comparable to stand-alone boutique preamps Powerful Phones output with Level control and Direct Monitor select Status, Signal, and Clip indications for a perfect overview USB port for connection and power Free audio recording, editing, and podcasting software plus 150 instrument/effect plug-ins downloadable at behringer.com Designed and engineered in Germany IMPORTANT INFORMATION This soundcard is compatible with both Microsoft Windows and Apple OSX operating systems. For Microsoft Windows, please download the required driver from https://www.fastrak.co.za/products/asio4all and follow the installation instructions. For Apple OSX no additional driver is required and the soundcard is plug and play. Once you have completed installing the ASIO4ALL driver, simply connect the soundcard to your computer using the provided USB Cable. This soundcard is compatible with all DAW software that recognises ASIO4ALL and Core Audio Drivers       48 kHz Precision You take your tracks seriously, and the UM2 respects them too, providing 48 kHz resolution, for the amazingly-detailed and pristine recording quality your music deserves.   Studio in a Little Black Box When those creative juices start flowing, you need a fast and easy way to get those musical ideas into your Mac or Windows computer – that’s where the UM2 comes in.   Just plug in a microphone, instrument or line level sources to the combination XLR/TRS input and additional ¼ " input for the ultimate in studio flexibility.   The easy-to-use UM2 is ready whenever you are, ensuring an ultra-clean pathway to your computer’s hard drive for stunningly-professional results – the perfect solution for the solo musician wanting to capture that next big hit!   Seamless Integration with Popular DAWs The ultra-compact UM2 is totally compatible with virtually all popular recording software including Avid Pro Tools*, Ableton Live*, Steinberg Cubase*, etc., so you can record tracks directly into you favorite computer-based DAW – and mix and master to your heart’s content.   Sonically Superior Mic Preamps The studio-grade XENYX Mic Preamp used in the UM2, has been praised by audio engineers all over the world for its hug-headroom, low-noise operation.   These state-of-the-art mic pres represent a major step in the evolution of audio technology – and they can easily hold their own, even when compared to the most expensive stand-alone mic preamps. XENYX preamps offer a staggering 130 dB of dynamic range, with a bandwidth that extends from below 10 Hz to well above 200 kHz.   Armed with these outstanding mic preamps, the UM2 provides such transparent, crystal-clear performance you just might think someone upgraded your mics while you weren’t looking.   Convenient Monitoring The UM2 Mix control allows direct monitor select, which means musicians can experience their performance clearly – resulting in a better performance and recording.   With its powerful Phones Output, Direct Monitor Level control, Status and Signal Clip LEDs, plus USB-supplied power – the UM2 is ready to go wherever you go.   Getting Connected The UM2 Mix control allows direct monitor select, which means musicians can experience their performance clearly – resulting in a better performance and recording.   With its powerful Phones Output, Direct Monitor Level control, Status and Signal Clip LEDs, plus USB-supplied power – the UM2 is ready to go wherever you go.   Free Would Be Nice! Because you’ll want to take full advantage of the UM2’s recording and podcasting potential, we’ve included a download for all the software you’ll need for audio recording, editing and even podcasting – all free of charge and downloadable from behringer.com.   You’ll be ready to go live on your PC or Mac right out of the box! We’ve also provided a free download of more than 150 virtual instruments and FX plug-ins – turning your computer into a powerful home-based or mobile recording studio from input to output.   Recording the Next Big Hit The amazing UM2 ultra-compact 2 x 2, 48 kHz USB audio interface allows you to record the perfect vocal or instrument tracks directly to your computer, thanks to the XENYX Mic Preamp with +48 Volt phantom power for condenser microphones – and studio-grade 48 kHz converter for superb sound quality.   Whether you’re a singer-songwriter, producer on the go, or just need a rock-solid interface for running backing tracks at the gig, the ultra-dependable U-PHORIA UM2 will help you shine in the digital domain.    

Read more less

Astro Audio Pro Studio in a Box [AA-LRS-6]  The AA LRS-6 Pro Studio-in-a-Box is designed to equip budding musicians, podcasters, or home recording enthusiasts with a complete starter setup. Audio Interface Features Mic/Instrument Input: 2 Dynamic range: >110dB THD: <0.001% A/D: 24-bit/192kHz Phantom power: 48V CMRR: 75dB Frequency response: 20Hz-20kHz Noise ratio: -80dB Condenser Microphone Features Polar pattern: Cardioid Mic core: Dia 26mm Freq response: 20Hz-20kHz Sensitivity: -37 +/- 2dB (1.5V, 680 Ohm) Max sound pressure: 125dB Electrical current: 3mA Headphone Features Type: closed Impedance: 32 Ohm Sensitivity: 98 +/-3dB Frequency response: 10Hz-30KHz Rating power: 350mW Max power: 1500mW Cable length: 2.5m Benefits: Instant setup: All necessary gear is included, so you don’t need to source parts separately Balanced kit: Components that work together—no compatibility headaches Cost-effective: Bundles typically cost less than buying each item individually Great for learning: Helps newcomers grasp signal flow, routing and monitoring in one package Portable: Designed for compact studios; easy to transport or relocate What's in the Box 1 x Audio Interface 1 x Headphone 1 x Condenser Microphone  

Read more less

Astro Audio 2 Channel Audio Interface [AA-LA122] The Astro Audio AA-LA122-202HD is a compact, professional 2-channel USB audio interface designed for musicians, podcasters, and home studios. Capture every detail of your performance with 24-bit/192 kHz sound quality, low noise, and a dynamic range exceeding 110 dB. Each input supports 48 V phantom power, making it perfect for condenser microphones or instruments. Simple plug-and-play connectivity ensures smooth operation on Windows and macOS systems. Whether you’re recording vocals, streaming, or producing podcasts, the AA-LA122-202HD delivers exceptional clarity in a sleek, portable body. Built by Astro Audio and available locally through Fastrak South Africa, this interface combines reliability, versatility, and outstanding performance — everything you need to take your recordings to the next level. Features Mic/Instrument Input: 2 Dynamic Range: >110dB THD: <0.001% A/D: 24-bit/192kHz Phantom Power: 48V CMRR: 75dB Frequency response: 20Hz-20kHz Noise ratio: -80dB What's in the Box 1 x 2-channel Audio Interface

Read more less

Astro Audio 4 Channel Audio Interface [AA-404hd] Step up your recording game with the Astro Audio AA-404hd — a professional 4-channel USB audio interface built for musicians, podcasters and home studio creators. With four mic/instrument inputs, 24-bit/192 kHz A/D conversion, dynamic range exceeding 110 dB and <0.001% THD, the AA-404hd delivers pristine clarity and performance. It supports 48V phantom power for condenser microphones, offers excellent noise ratio (<–80 dB) and full-band frequency response (20 Hz-20 kHz). Rugged and reliable, this interface integrates seamlessly into modern workflows via USB, making it ideal for multi-track recording, band tracking or podcast production. Available now in South Africa from Fastrak — trusted audio experts for over 20 years. Elevate your sound. Features Mic/Instrument Input: 4 Dynamic Range: >110dB THD: <0.001% A/D: 24-bit/192kHz Phantom Power: 48V CMRR: 75dB Frequency response: 20Hz-20kHz Noise ratio: -80dB What's in the Box 1 x 4-channel Audio Interface

Read more less